Prodipe Monitor PRO 7 - V4, black wood
Produktnummer:
PA-7V4-BW
EAN:
3760010257463
Produktinformationen "Prodipe Monitor PRO 7 - V4, black wood"
Prodipe Active monitors 6.5 inch bi-amplified
Check out the NEW Prodipe combined speaker system. If you connect the PRO 10S V4 subwoofer to the Prodipe Pro7 V4 monitors, the combined system will give you studio listening at a remarkably low price.
Specifications:
- Brand : Prodipe
- Amplification : AB Type
- Power: Total: 100W RMS
Treble: 30W RMS (50W peak)
Bass: 70W RMS (130W peak) - Dimensions : 320 (H) x 215 (W) x 260 (D) mm
- Weight : 7Kg
- Frequency response : 52Hz-22kHz
- Frequency : 2,7KHz
- Signal - noise : 85dB/94dB
- Tweeter : 1" Neodymium soft dome (25mm)
- Woofer : 6.5'' Fibreglass cone (16,5cm)
- Input connectors : XLR (balanced)
6.35 jack (balanced)
RCA (unbalanced) - Inout/output impedance: 10kΩ
- Subsonic Filter: 47Hz
- Adjusting treble : -2dB / -1dB / 0dB / +1dB
| Hersteller: | IPE music distribution,FR, Les Sables D´olonne, rue clement ader, www.prodipe.com |
|---|
Anmelden
Set item
Neu
Prodipe Subwoofer PRO 10S - V4, black wood
349,00 €*
Prodipe Subwoofer Pro 10S V4
Check out the NEW Prodipe combined speaker system. If you connect the PRO 10S V4 subwoofer to the Prodipe Pro5 V4, 7v4 or to the Pro8 V3 monitors, the combined system will give you studio listening at a remarkably low price.> The woofer cones are now in fibreglass. > The neodymium dome tweeters create a sound which is absolutely solid and supremely clear, even above 20KHz. This ensures that the quality of the music is exemplary. > The transducer magnets are shielded by anodised steel covers.> The active filtering has been completely overhauled to ensure that the crossover frequency doesn't suffer from any accidents or bumps.> The casing is made of high density wood to give the sound a high level of consistency and to eliminate any unwanted vibration.> Unlike many of the other manufacturers, we made the decision to put the bass reflex port at the front of the monitors to improve the decompression on the bass response.This makes it much easier to find the best position for each speaker. > There are ample connectors for an all-round use: XLR/TRS 6.35 Jack for a balanced connection, and Cinch (RCA) for an unbalanced connection.
> A compact, elegant design with a well-finished exterior.
Specification:
Amplification : Power RMS (peak) : 150W (270W)
Dimensions : 383(H)×355(W)×398(D) mm
Weight : 18Kg
Frequency response : 36Hz--150kHz
Signal - noise : 98dB
Woofer : 10'' Fibreglass cone
Input connectors : 2 x XLR (3-pins) 2 x 1/4" TRS - 10k Ohm (Balanced) 2 x RCA - 10k Ohm (Unbalanced)
Output connectors : 2 x XLR (3-pins) (Balanced) 2 x RCA - 10k Ohm (Unbalanced)
Phase : 0° 180°
Curves: