Prodipe Subwoofer Pro 10S V4
Check out the NEW Prodipe combined speaker system. If you connect the PRO 10S V4 subwoofer to the Prodipe Pro5 V4, 7v4 or to the Pro8 V3 monitors, the combined system will give you studio listening at a remarkably low price.> The woofer cones are now in fibreglass. > The neodymium dome tweeters create a sound which is absolutely solid and supremely clear, even above 20KHz. This ensures that the quality of the music is exemplary. > The transducer magnets are shielded by anodised steel covers.> The active filtering has been completely overhauled to ensure that the crossover frequency doesn't suffer from any accidents or bumps.> The casing is made of high density wood to give the sound a high level of consistency and to eliminate any unwanted vibration.> Unlike many of the other manufacturers, we made the decision to put the bass reflex port at the front of the monitors to improve the decompression on the bass response.This makes it much easier to find the best position for each speaker. > There are ample connectors for an all-round use: XLR/TRS 6.35 Jack for a balanced connection, and Cinch (RCA) for an unbalanced connection.
> A compact, elegant design with a well-finished exterior.
Specification:
Amplification : Power RMS (peak) : 150W (270W)
Dimensions : 383(H)×355(W)×398(D) mm
Weight : 18Kg
Frequency response : 36Hz--150kHz
Signal - noise : 98dB
Woofer : 10'' Fibreglass cone
Input connectors : 2 x XLR (3-pins) 2 x 1/4" TRS - 10k Ohm (Balanced) 2 x RCA - 10k Ohm (Unbalanced)
Output connectors : 2 x XLR (3-pins) (Balanced) 2 x RCA - 10k Ohm (Unbalanced)
Phase : 0° 180°
Curves:
Prodipe Active monitors 8 inch bi-amplifiedCheck out the NEW Prodipe combined speaker system. If you connect the PRO 10S V4 subwoofer to the Prodipe Pro8 V4 monitors, the combined system will give you studio listening at a remarkably low price.Specifications:
Brand : Prodipe
Amplification : 125W RMS Power HF RMS (peak) : 35W (40W) Power LF RMS (peak) : 30W (90W)
Dimensions : 380 (H) x 260 (W) x 300 (D) mm
Weight : 13Kg
Frequency response : 50Hz--22kHz
Frequency : 2,4KHz
Signal - noise : 86dB/97dB
Tweeter : Neodymium soft dome
Woofer : 8'' Fibreglass cone
Input connectors : XLR (3-pins) (Balanced) 1/4" TRS - 10k Ohm (Balanced) RCA - 10k Ohm (Unbalanced)
Adjusting treble : +1dB 0dB -1dB -2dB
Prodipe Active monitors 8 inch bi-amplifiedCheck out the NEW Prodipe combined speaker system. If you connect the PRO 10S V4 subwoofer to the Prodipe Pro8 V4 monitors, the combined system will give you studio listening at a remarkably low price.Specifications:
Brand : Prodipe
Amplification : 125W RMS Power HF RMS (peak) : 35W (40W) Power LF RMS (peak) : 30W (90W)
Dimensions : 380 (H) x 260 (W) x 300 (D) mm
Weight : 13Kg
Frequency response : 50Hz--22kHz
Frequency : 2,4KHz
Signal - noise : 86dB/97dB
Tweeter : Neodymium soft dome
Woofer : 8'' Fibreglass cone
Input connectors : XLR (3-pins) (Balanced) 1/4" TRS - 10k Ohm (Balanced) RCA - 10k Ohm (Unbalanced)
Adjusting treble : +1dB 0dB -1dB -2dB
Prodipe Active monitors 8 inch bi-amplifiedCheck out the NEW Prodipe combined speaker system. If you connect the PRO 10S V4 subwoofer to the Prodipe Pro8 V4 monitors, the combined system will give you studio listening at a remarkably low price.Specifications:
Brand : Prodipe
Amplification : 125W RMS Power HF RMS (peak) : 35W (40W) Power LF RMS (peak) : 30W (90W)
Dimensions : 380 (H) x 260 (W) x 300 (D) mm
Weight : 13Kg
Frequency response : 50Hz--22kHz
Frequency : 2,4KHz
Signal - noise : 86dB/97dB
Tweeter : Neodymium soft dome
Woofer : 8'' Fibreglass cone
Input connectors : XLR (3-pins) (Balanced) 1/4" TRS - 10k Ohm (Balanced) RCA - 10k Ohm (Unbalanced)
Adjusting treble : +1dB 0dB -1dB -2dB
Prodipe Active monitors 6.5 inch bi-amplifiedCheck out the NEW Prodipe combined speaker system. If you connect the PRO 10S V4 subwoofer to the Prodipe Pro7 V4 monitors, the combined system will give you studio listening at a remarkably low price.Specifications:
Brand : Prodipe
Amplification : 125W RMS Power HF RMS (peak) : 35W (40W) Power LF RMS (peak) : 30W (90W)
Dimensions : 380 (H) x 260 (W) x 300 (D) mm
Weight : 13Kg
Frequency response : 50Hz--22kHz
Frequency : 2,4KHz
Signal - noise : 86dB/97dB
Tweeter : Neodymium soft dome
Woofer : 6.5'' Fibreglass cone
Input connectors : XLR (3-pins) (Balanced) 1/4" TRS - 10k Ohm (Balanced) RCA - 10k Ohm (Unbalanced)
Adjusting treble : +1dB 0dB -1dB -2dB
Prodipe Active monitors 6.5 inch bi-amplifiedCheck out the NEW Prodipe combined speaker system. If you connect the PRO 10S V4 subwoofer to the Prodipe Pro7 V4 monitors, the combined system will give you studio listening at a remarkably low price.Specifications:
Brand : Prodipe
Amplification : 125W RMS Power HF RMS (peak) : 35W (40W) Power LF RMS (peak) : 30W (90W)
Dimensions : 380 (H) x 260 (W) x 300 (D) mm
Weight : 13Kg
Frequency response : 50Hz--22kHz
Frequency : 2,4KHz
Signal - noise : 86dB/97dB
Tweeter : Neodymium soft dome
Woofer : 6.5'' Fibreglass cone
Input connectors : XLR (3-pins) (Balanced) 1/4" TRS - 10k Ohm (Balanced) RCA - 10k Ohm (Unbalanced)
Adjusting treble : +1dB 0dB -1dB -2dB
Prodipe Active monitors 6.5 inch bi-amplifiedCheck out the NEW Prodipe combined speaker system. If you connect the PRO 10S V4 subwoofer to the Prodipe Pro7 V4 monitors, the combined system will give you studio listening at a remarkably low price.Specifications:
Brand : Prodipe
Amplification : 125W RMS Power HF RMS (peak) : 35W (40W) Power LF RMS (peak) : 30W (90W)
Dimensions : 380 (H) x 260 (W) x 300 (D) mm
Weight : 13Kg
Frequency response : 50Hz--22kHz
Frequency : 2,4KHz
Signal - noise : 86dB/97dB
Tweeter : Neodymium soft dome
Woofer : 6.5'' Fibreglass cone
Input connectors : XLR (3-pins) (Balanced) 1/4" TRS - 10k Ohm (Balanced) RCA - 10k Ohm (Unbalanced)
Adjusting treble : +1dB 0dB -1dB -2dB
Prodipe Active monitors 5 inch bi-amplifiedCheck out the Prodipe combined speaker system. If you connect the PRO 10S V4 subwoofer to the Prodipe Pro5 V4 monitors, the combined system will give you studio listening at a remarkably low price.Specifications:
Brand : Prodipe
Amplification : 75W RMS Power HF RMS (peak) : 25W (40W) Power LF RMS (peak) : 50W (90W)
Dimensions : 277(H)×180(W)×245(D) mm
Weight : 5.5 Kgs
Frequency response : 55Hz--22kHz
Frequency : 3KHz
Signal - noise : 82dB/90dB
Tweeter : 1" Neodymium soft dome
Woofer : 5.25'' Fibreglass cone
Input connectors : XLR (3-pins) (Balanced) 1/4" TRS - 10k Ohm (Balanced) RCA - 10k Ohm (Unbalanced)
Adjusting treble : +1dB 0dB -1dB -2dB
Prodipe Active monitors 5 inch bi-amplifiedCheck out the Prodipe combined speaker system. If you connect the PRO 10S V4 subwoofer to the Prodipe Pro5 V4 monitors, the combined system will give you studio listening at a remarkably low price.Specifications:
Brand : Prodipe
Amplification : 75W RMS Power HF RMS (peak) : 25W (40W) Power LF RMS (peak) : 50W (90W)
Dimensions : 277(H)×180(W)×245(D) mm
Weight : 5.5 Kgs
Frequency response : 55Hz--22kHz
Frequency : 3KHz
Signal - noise : 82dB/90dB
Tweeter : 1" Neodymium soft dome
Woofer : 5.25'' Fibreglass cone
Input connectors : XLR (3-pins) (Balanced) 1/4" TRS - 10k Ohm (Balanced) RCA - 10k Ohm (Unbalanced)
Adjusting treble : +1dB 0dB -1dB -2dB
Prodipe Active monitors 5 inch bi-amplifiedCheck out the Prodipe combined speaker system. If you connect the PRO 10S V4 subwoofer to the Prodipe Pro5 V4 monitors, the combined system will give you studio listening at a remarkably low price.Specifications:
Brand : Prodipe
Amplification : 75W RMS Power HF RMS (peak) : 25W (40W) Power LF RMS (peak) : 50W (90W)
Dimensions : 277(H)×180(W)×245(D) mm
Weight : 5.5 Kgs
Frequency response : 55Hz--22kHz
Frequency : 3KHz
Signal - noise : 82dB/90dB
Tweeter : 1" Neodymium soft dome
Woofer : 5.25'' Fibreglass cone
Input connectors : XLR (3-pins) (Balanced) 1/4" TRS - 10k Ohm (Balanced) RCA - 10k Ohm (Unbalanced)
Adjusting treble : +1dB 0dB -1dB -2dB
Hochwertiges Hören!
Ein halboffener Studio-Kopfhörer, der für anspruchsvolle Höranwendungen und hochpräzises Monitoring entwickelt wurde. Besonders für professionelle Musiker konzipiert, ist er ideal für die Arbeit im Studio (oder Heimstudio) sowie für Rundfunkanwendungen.
Vom Tontechniker bis zum anspruchsvollen Audiophilen bietet der 5000B außergewöhnlichen, kompromisslosen Klang.
Specification
Brand : Prodipe
Headphones diameter : 50 mm
Stereo jack adapter : 6.35 mm
Impedance: 32Ω
Delivered with : 1.5m detachable jack cable
3m detachable jack cable
Storage case
Pairs of rubber pads
Pairs of velvet pads.
Frequency response : 15Hz-28kHz
Type : semi-open
Cable length : approx. 1,5 and 3m
Sensitivity : 94dB ±3dB
Power : 1 200mW
Prodipe Microphone for VIOLIN/ALTO VIOLIN - Cardio.
Violins and violas come in various sizes, so they need a fully adaptable mounting system, hence our decision to develop two flexible clamps.
The microphone VL21-C is the cardioid version of the VL21 Lanen, equipped with the famous cell 21.
With our clamps, our capsule is as close as possible to the sound source, just beneath the strings, tight against the soundboard, ensuring that the recording is richer in harmonics and more dynamic.
This microphone can be used in wireless version: to connect to the PRODIPE UHF B210 SOLO or UHF B210 DUO systems (specially adapted for the Lanen 21 capsule impedance).
Clamp(s) and XLR adaptor are supplied for wired mic use (48V phantom power supply required).
The strengths of VL21-C Lanen Violin & Altos :
Excellent natural sound.
UHF compatible (with the PRODIPE UHF B210 SOLO or UHF B210 DUO systems - Sold separately).
Easy mounting.
Lightweight rubber clamp specific to the instrument.
Very high level of protection from instrument vibration.
Mini XLR to XLR connector adaptor ensures that the mic lead is properly positioned on your instrument (48V phantom power supply required for wired connection).
Specification:
Microphone's range : Instrument microphones
Kind of microphone : Condenser
Brand : Prodipe
Directivity : cardioid
Impedance : Output:
2.2 KΩ
Sensitivity : -47dB ±3dB (0dB=1V/Pa at 1KHz)
Cable length : approx. 1,5 m
Pression max. SPL : 140dB
Signal - noise : 68dB
Frequency response : 50Hz - 20KHz
ST-1 MK2 Lanen
The ST-1 MK2 Lanen, designed on the basis of the STC-3D MK2, is one of the only condenser microphones on the market, equipped with a real 34mm large diaphragm capsule, with a gold-plated one-inch diaphragm, in this price range.
Almost all of the other brands speak of a large membrane, for capsules from 16 to 19mm and the difference is significant!
Unlike "entry-level" products, which are often too cold and too bright, with less full sound in the bass and lower midrange, the ST-1 MK2 Lanen perfectly reproduces the definition and warmth of the recorded source.
Microphone's range :
Condenser microphones Studio / Live
Instrument microphones
Kind of microphone : Condenser
Brand : Prodipe
Delivered with : delivered with its clip and its cover
Directivity : Cardioid
Impedance : Output: 100Ω±30% (at 1 kHz)
Load impedance :≥1000Ω
Sensitivity : -37dB±2dB (0dB=1V/Pa at 1kHz)
Width capsule : 34 mm single-diameter one-inch
Frequency response : 20Hz-20kHz,
Audio USB Interface Studio 22 +
The STUDIO 22+ interface allows you, thanks to an XLR / Jack combo input, a stereo jack input, phantom power and its USB 2.0 interface, to record yourself directly on your computer. Can be used with CUBASE, PRO TOOLS or any other major M.A.O. Mac and PC compatible.
One mono input for instrument/mic:
One balanced XLR combined connector (13) and balanced Jack (14).
Phantom power with ON/OFF switch and LED indicator (1).
Gain control knob (3)
One stereo line/instrument input:
Dual 6.35mm Jack socket (balanced/unbalanced) (12)
Volume knob with LED signal indicator (SIG) (4)
One stereo USB audio port (7) :
One stereo BUS channel (from Mac or PC).
USB volume knob (2)
One MAIN MIX stereo output:
Dual Jack socket (balanced/unbalanced) (5).
MAIN MIX output level knob (11)
Hi-Z" line/instrument impedance button (15).
One stereo headphone output:
PHONES Jack socket (6).
PHONES output level knob (9)
One stereo USB port (7) :
One stereo BUS channel (from Mac or PC).
General features:
Power LED (green)
Mac OS compatible (CoreAudio)
Windows compatible (Prodipe ASIO 2.0)
USB power (USB A to B cable supplied)
External power supply possible: DC 5Volts/500mA (via USB: USB charger, smartphone charger, etc non supplied )
3 pin XLR connector (IEC 60268 standard), pin 1: ground, pin 2: hot (+), and pin 3: cold (-)
Power consumption: 2.5 Watts (max)
Dimensions: (W x H x D) 109mm x 52mm x104 mm
Weight: 0.5kg
Der Pro 880 ist komplett geschlossen und für ein perfektes und präzises Monitoring konzipiert. Gut geeigent für:
Profi Musiker
Home/ - Studio
Specifications
Connectors : jack 3,5 mn
Stereo jack adapter : 6.35 mm
Impedance 32Ω
Frequency response : 15Hz-22kHz
Type : Closed
Cable length : app 3 m
Sensitivity : 95dB ±3dB
Power : 1500mW
Color: Black
Extremer Komfort für höchste Hörqualität
In kontrastierendem Schwarz und leuchtendem Rot ist dieses Modell nicht nur für das Studio und erfahrene Musiker gedacht, sondern auch für das entspannte Hören zu Hause oder unterwegs, beispielsweise in der U-Bahn. Dank des hohen Tragekomforts können Sie es über längere Zeiträume verwenden, ohne Hörermüdung zu verspüren.
Ideal für Studioaufnahmen
Mit seinem geschlossenen Design bietet der 3000BR eine ideale Abschirmung von der Außenwelt und ist somit bestens geeignet für Monitoring während der Aufnahme.
Leichtes, verstellbares Kopfband
Das Kopfband ist verstellbar und flexibel aufgehängt, um eine gute Abdichtung am Ohr zu gewährleisten, ohne zu fest zu sitzen. Mit einem Gesamtgewicht von nur 233 g und weichen Ohrpolstern aus Kunstleder passt sich der 3000BR optimal an Ihre Kopfform an und bleibt auch bei langen Arbeitssitzungen komfortabel.
Specification
Brand : Prodipe
Headphones diameter : ø 40mm
Connectors : jack 3,5 mn
Stereo jack adapter : 6.35 mm
Impedance: 32Ω
Frequency response : 15Hz-22kHz
Type : Semi-open
Cable length : app 3 m
Sensitivity : 95dB ±3dB
Power : 400mW
Prodipe Professional Headphone versatile Black
Are you a musician?
Someone who likes listening to music?
Prodipe has added colour to its range of headphones. At home, in the studio or even on the train - they'll look good anywhere.
Specification
Brand : Prodipe
Headphones diameter : ø 40mm
Connectors : jack 3,5 mn
Stereo jack adapter : 6.35 mm
Impedance 32Ω
Frequency response : 15Hz-22kHz
Type : Semi-open
Cable length : about 1.8m
Sensitivity : 95dB ±3dB
Power : 400mW
Color: White
Prodipe Monitoring-Kopfhörer.
Der geschlossene Pro 580 ist für den Einsatz durch professionelle Musiker, Studios und Heimstudios entwickelt worden, um präzises Monitoring zu ermöglichen.
Klangqualität auf hohem Niveau
Kopfhörer mit weichen Ohrpolstern
Verstellbarer Kopfbügel
Specifications:
Brand : Prodipe
Connectors : jack 3,5 mn
Stereo jack adapter : 6,35 mm
Impedance: 32Ω
Frequency response : 20Hz-20kHz
Type : closed
Cable length : app. 1,8m
Sensitivity : 105dB ±3dB
Power : 200mW
PRO SHM 8
Shock mount PRO SHM 8
hockmount is designed to absorb vibrations from the floor and air, allowing a cleaner reproduction of sound.
Suits large condenser microphones.
The shockmount screws onto any regular mic stand and boom
22,00 €*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...